Digitrax DZ146 Decoder
Out of stock
Add to Bag
Wired Motor & Function Decoder that fits many N and HO Scale Locos.
Size: .55” x .4” x .148”
14mm x 10.23mm x 3.77mm
1.0 Amp/1.5 Amps Peak
Functions, 0.5 Amp
Function outputs for prototypical lighting effects and on/off control:
Constant Brightness Lighting
with directional or independent control.
Optimized selectable LED or incandescent lamp operation
like Ditch lights, Mars lights, strobes, and many more
Configurable Pulse Function
available on all function outputs.
& Standard Function Qualifiers
operate functions based on direction,
F0 on or off, direction and F0, and whether loco is moving.
for custom function setup.
Master Light Switch
turns off all lights & functions with one keystroke.
Advanced Consist Function Controls.
-Your locomotives look like the real thing.
The Digitrax LocoMotion System makes them run like the real thing, too!
Scaleable Speed Stabilization (Back EMF)
with simple setup & 256 level resolution.
128 Speed Step
operation (14 or 28 steps can also be used).
with acceleration and deceleration.
Normal Direction of Travel
is user selectable.
feature for easier and faster access to yard speeds.
3 Step Speed Tables
set start, mid and max voltage for custom control.
28 Step Speed Tables
with 256 level resolution for precise control.
Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.
2 Digit and 4 Digit Addressing.
Basic, Advanced & UniVersal Consisting.
SuperSonic motor drive for silent operation.
Direct mode programming.
Decoder Reset CV with or without speed table reset.
Transponder Equipped ready for transponding on your Layout.
Motor Isolation Protection helps prevent damage to your decoder.
Automatic Analog Mode Conversion when running on DC layout.
Decoder Lock for individual programming of multiple decoders in one loco.
Digitrax “No Worries” Warranty.
Save this product for later
Display prices in:
DCC & Repairs